sprüche und wünsche
Home Improvement

How to Lay Herringbone Engineered Flooring?

Herringbone engineered flooring pattern has quickly become a favourite among the new home-buyers. The zig-zag flooring style creates a striking layout that becomes a statement of the room.

While flooring is an expert’s job and should be done by a professional, the ongoing pandemic has made things a little difficult. Many companies are still working with less workforce, creating a deficiency in labour supply.

Laying herringbone flooring is a little more challenging than any other engineered wood flooring. But with this guide and the right materials, you can complete this DIY project.

The preparation

Pre-installation preparation is very important for any type of flooring project.

Get the right materials

Herringbone floors aremore flexible than other types of unfinished parquet floorings. But choosing the right type of material is crucial. Get your planks from reliable flooring companies like Floorsave. 

You can go for solid hardwood for a high-quality luxurious finish. But for a DIY project engineered wood flooring is a wise choice. It is easier to install than hardwood and prefinished ones don’t require staining.

Make a list of the tools and materials

Home flooring will be there for decades. You need proper tools and supplies to make sure it is correctly installed.

To help, we have created a list of basic supplies you need to install herringbone floors:

  • Wooden planks
  • Border and apron flooring strips
  • Circular saw
  • Chalk line tool
  • Wood glue
  • Router
  • Tape measures
  • Rafter squares
  • Rubber mallets
  • Screws
  • Flooring nailer, splines, nails
  • Painter’s tape
  • Some spare ¾ – inch of plywood

The installation

After you gather the supplies, give a quick check of the subfloors. Fix any issues beforehand and ensure that it is completely levelled.

Now you start with the installation process.

Step 1

Once you know the design, use tapes to measure the centre of the room. Herringbone design won’t cover every inch of the space due to its layout. You need to create a line that extends from one wall to the other. The rectangular field will be your layout. Secure that with a tape measure.

Step 2

This is where you find out the perfect length of your slats and start cutting. Use rafter squares to keep each plank at a 90-degree angle. The slats must also be trimmed to a multiple of their width.

Once that is settled, use a circular saw to trim and make the slats to the exact length. You need to trim the tongue side of each slat as well.

Step 3

After cutting each slat, you need to add the grooves to set them perfectly. Set the router based on the groove of a slat. Twist and double-check to make sure the slats fit well. Rout the end of each slat that you trimmed.

Step 4

You need a template to install the herringbone planks. For this, turn a ¾ inch plywood into a right triangle. The length of the sides should be the same as your flooring slat.

Now, draw a centreline in the middle of the nailing blank. Position it according to the floor alongside the top border. Secure and screw it into the subfloor. Use the router to create the grooves along the edges.

Step 5

A good way to start nailing the boards is to use a backer board. Place the first to slats and make sure the tongue is sticking out. Line up the points and double-check the plywood to ensure that it is laying square.

Use the mallet to hit the flooring nailer. Start adding slats to create the herringbone pattern. Once the design reaches the border, secure it into the subfloor. Continue with the pattern until you complete the area inside the border.

Step 6

There might be a few empty spaces in between the patterns. You need to fill them up using flooring spline and glue. Take a slat with grooves and add spline turning it into a tongue.

Place the extra slats in place to fill any empty gaps. Trim out any extra material overlapping the border. Use a circular saw to make the borders polished.

After completing the flooring, you can add decorative border strips around the flooring. This will make it patterns stand out more. We hope that this guide would encourage you to try herringbone engineered flooring in your home.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
canlı casino siteleri casino siteleri 1xbet giriş casino hikaye