Most people consider that the work related to manufacturing and production is easy. But actually this is not the fact, handling so many things for making one thing in the proper way is a big issue. That’s why people are willing to remain on the balance side, to handle things in the proper way.
The minor up and down in any of the areas of the production can disturb all the planning and production. The real fact is that for the production cycle completion you need to consider so many things. If each thing gets out of the box means, you have to bear huge losses in the production of any product.
This same logic applies to the gloves manufacturing as well. Because gloves manufacturing needs to consider so many things, rather than the single thing. So, below are some areas which need to be considered fairly for smart production output.
1. Vendor finding, selection and dealing problem
The sourcing of the actual material matters a lot for the complete production cycle. Because many of the vendors step down most of the time. Dealing with the work with a good vendor is the best way to run the cycle. As many of the vendors step down from the commitment which they made with their buyers.
2. Inhouse different costing variation and its controlling
Many of the production setup people think that handling external costs and managing all things externally is enough. But in actuality this is not the real thing, many of the internal factors affect the cost as well. Many of them demand proper control, but most of the time in-house controls remain out of order.
3. Supply cycle related problem
Many of the production gets easily disturb with the supply’s shortage and is non-available at the time. due to this need to face huge loss of investment and the customer. As the supply cycle affects the front orders and back-orders booth at a time. That proper flow of the cycle of supplies is quite essential.
4. Different types of material with different quality related problem
The timely material arrival is not the real thing, the arrival of the good quality material on time matters a lot. Most of the time the bad suppliers deliver the material to remain in agreement. But in actuality they do not care for the quality of the material and its related issues. If the receiving side does not check it smartly it can hurt all the production output.
5. Material making, matching and mixing related problem
Many of the semi materials which make material from material depend on the matching. Further its proper ratio and mixing is also a big job which has an effect on overall production. That means minor issues and negligence can create big gaps in the production line.
6. Labor controlling and handling issues
The labor is human and controlling is not easy because of the mind factor. As they can think, react and take decisions not like machines which you can operate. This is the main thing as all the work related to them and all the production depends on them.
7. Machine proper working issue and parts arrangement problem
Many time machines if not fitted correctly and not working fine can cause high material wastage. Further it can also give big defects in the final production which is a huge loss. The machine working and the handling of the parts related to it matters a lot.
8. High rate of production related issues and number of defects
The rate of the defects in the production output leads to the heavy loss of the investment. Because in that need to bear the material loss as well as all the overhead losses as well. This is the big matter as the defects most of the time are not workable and not recoverable.
9. Chasing different issues in ground plan of production
The many other issues are in touch with the production. Such as the local government and private bodies regulations. Strikes and the union issues are the other common types of the issues. The reflection of the good plan in the worst category matters a lot.
10. Delivery with different plan put up many types of disturbance
The disturbance in the regular delivery causes a big issue, that means high chances of non-acceptance. Furthermore the rejection and penalty are also a part of this cycle. As most of the customers are too hard on their professional working.
11. Abnormal handling of customers without company care
The bad and abnormal handling of the customers are the main issue. Because many times wrong handling of customers gives a big push to the company towards the losses. Because many times customers run away and not do any business with the manufacturing concerns.
12. Order and product refusing with cancelation of existing orders
The order and product refusion are quite common as this depends on the customers will. Furthermore the delay and defect mean either cancellation or the rework on the goods. In both cases the main issue is the cost and over cost on the factory muscles.
13. Payment related delays with so many recoveries matters
The payment delays and not making on time is the common issue with the companies. As many of the businesses are willing to get the goods on the credit and long credit. That was not agreed most of the time when making deals with the business.
14. Material manipulation and shortage by vendors
Many of the vendors create shortages and do manipulation in the material availability. They do it because of the more profits and increase in price artificially. This is the fact which most of the bad vendors do when they have good demand for their materials.
15. Lack of focus on the target market and supplies
The combination of the good marketing and proper supplies of the product is the main thing. Because lack of focus on those areas is always dangerous for the manufacturing. Because they can face no sales and loss of investment as well. That’s why medical gloves suppliers prefer to play smartly to keep up business on top.
Read more: Reduce Your Stress Levels
